Sig Sauer - Romeo-m17 Sight - Coyote Tan, 2 Moa Red Dot W/ 32 Moa Circle, 24mm - SORM1700

ROMEO-M17 Sight

 

 

The M17 and M18 pistols have been selected by the US Military as the official sidearm, and the ROMEO-M17 is the only optic that is truly designed specifically for this pistol. All other optics have many disadvantages and make several compromises. The ROMEO-M17 does not. This is an American-built MIL-SPEC red dot truly worthy of the SIG SAUER name.

 

*Please Note - The ROMEO-M17 pistol red dot sight utilizes SIG SAUER'S proprietary SIG-LOC mounting interface and only fits SIG SAUER M17/M18 military, issue, and commemorative issue pistols with a single optics plate mounting screw. This sight will not fit any other pistols.

 

 

Description:

• A fully enclosed, sealed and purged optical system, for ultimate protection from the elements
• Mounts from underneath the pistol slide, re-using the MHS pistol rear sight block and sight block screw
• 7075 Aluminum housing
• Integrated gas deflector on the front of the housing
• Machined anti-reflection grooves on all rear surfaces for reduced glare
• Extremely low deck height, allowing a full sight picture and co-witness with standard-height sights
• SIG-LOC (SIG Leverage Optimizing Connection) proprietary mounting interface, for the ultimate optic/pistol lockup.
• A high-efficiency point source LED emitter, with 2 MOA dot/32 MOA circle reticle. The reticles are independently selectable (circle only, dot only, or circle/dot combination).
• Independent brightness adjustment buttons that are recessed within a protective plate which can be activated even with gloves on. Buttons have bump features above UP and below DOWN, so they can be determined by feel.
• 15 brightness settings, with 3 of the settings optimized for use with Gen 3+ NV devices
• A side-mounted CR2032 battery compartment with a threaded battery cap, for easy battery changes without the need to remove the optic from the firearm. The cap is slotted and knurled, for use with or without tools.
• Minimum continuous runtime of 20,000 hours, at medium brightness setting
• 2 drainage holes machined in the sides of the housing, just behind the rear sealed window, to allow pooled liquid to escape when the optic goes from a vertical position (such as in a holster) to a horizontal position (such as shooting)
• Windage and elevation adjustments have tactile clicks. Adjustment screws are slotted, for use with any small flat-blade tool. Adjustment resolution is 1.5 MOA per click.
• MOTAC (Motion Activated Illumination)
• MAGNETAC (Magnetic Activation)
• D.A.R.C. (Dark Adaptive Reticles & Coatings)
• Designed, developed, tested and fully assembled in the USA

Specifications:

• RX Footprint    SIG-LOC (M17/M18 MHS & Commem.)
• Color    Coyote Tan
• Height    1.1 in
• Magnification    1x
• Clear Aperture    24 mm
• Overall Length    2.4 in
• Overall Width    0.9 in
• Battery    (1) CR2032
• Emitter    Enclosed
• Reticle    2 MOA Red Dot / 32 MOA Circle
• Reticle Color    Red
• Weight    1.5 oz
• Illumination Settings    12 DAYLIGHT / 3 NV
• Total Elevation Travel    40 MOA
• Total Windage Travel    80 MOA
• Run Time    Up to 50,000 (Dot Only)

STOCK NOTICE: This item is NOT marked "In Stock". We will contact you within 12-24 hours by email if your order is on backorder with our distributor and will take longer than the 5-7 business days it takes us to ship out. Please do not order if you need this item shipped immediately.